Oberheim MC 2000, Руководство по эксплуатации

Страница: 18 / 80

MC 2000
Expandable MIDI Master Controller
92
4. WRITE PROCEDURE IN THE PROGRAM AND EDIT MODE
4.1. PATCH NUMBERING
Pressing the [WRITE] key in the main Program Mode page or in any page of the Edit
operating mode will give access to the WRITE PROGRAM procedure, allowing the patch
to be saved in accordance with the modifications made.
When the [WRITE] key is pressed, the key LED starts to flash and the following video
page will appear on the display:
Pressing [ESC] returns to the previous page.
If we look at the WRITE page display, we can see that the memory location which will
house the program appears in the top line; the name of the program appears on the right:
N.B. When the Write video page is accessed, the current patch with the name assigned to
it is always offered as destination. If the modifications made are intended for the current
patch, the user simply presses the [WRITE] key again and the same patch will be saved
with the new modifications. If the modifications are intended for a new patch created on
the basis of the current patch, the memory location must be varied using the Data Entry
devices; the memory location has a range between A-001 A-127 and B-001 B-128.
The only function key enabled in this video page is [F6], next to which the name field
appears to indicate that pressing this key allows a name to be assigned to the program to
be saved.
4.2. ASSIGNING A NAME TO THE PATCH
When [F6] is pressed, the display will be as shown below:
Logically, the field between the
[
and
]
characters represents the name being modified;
when the function is accessed, the first character in this field is automatically selected and
thus associated to a flashing
underline cursor. The Data Entry devices such as the
Encoder, Numeric Pad and [INC] and [DEC] keys can be used to modify the letter selected
by the flashing cursor.