MC 2000
Expandable MIDI Master Controller
119
this key is pressed after this, the system will move on one step, and each step will be
loaded automatically.
•
[F6] =
NEXT
function: movement one step forward, with automatic loading.
Once the chain has been performed, press the [ESC] key to return to the chain selection
video page.
Press [ESC] again to return to the Program Mode.
6.4. WRITE CHAIN
Pressing the [WRITE] key provided in the CHAIN EDIT video page will give access to the
WRITE CHAIN procedure, which allows the Chain to be memorized with the modifications
made.
When the [WRITE] key is pressed after this, the LED in the key will begin to flash and the
display will show the following video page:
Press [ESC] to return to the previous page.
As can be seen, the display contains 2 lines, the upper line allowing selection of the
memory location which will house the Chain (indicating the relative name), while the
bottom line contains the "
name
" field in brackets and in lower case, indicating that in this
case key [F6] recalls the function for assigning a new name to the Chain.
Note that the only function key enabled in this video page is [F6], corresponding to the
"
name
" function.
The Data Entry devices can be used to select the destination of the Chain in a range from
1 to 64.
Function key [F6] (name) can be used to proceed with renaming of the memory location,
and the display will appear as shown below:
Содержание MC 2000
Страница 1: ...Manuale Operativo MASTER CONTROLLER EXPANDABLE MIDI M C 2000 Operating Manual...
Страница 78: ......
