NV-DVR3009 / NV-DVR3016 ver. 1.1 - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
44
MULTIPLEXER’S MENU
3.7.5 Video Output
In the
Video Output
submenu users define what will be displayed on a spot monitor.
•
After selecting
Monitor Output
,
the same images that are displayed on the main monitor are
displayed on the spot monitor.
•
After selecting
Input Channel
,
spot monitor displays images from a camera connected to an input
chosen in the window.
•
After selecting
Auto Select,
sequence from the channels ticked below is displayed on the spot
monitor.
Ticking
Monitor Output
means that the image from the main monitor is added to the sequence.
Ticking
Skip V. Loss
allows users to exclude these channels from the sequence where there is no
video signal.
Ticking
Alarm Sequence
allows users to stop sequence display after alarm has been detected on
one of the alarm inputs and switch to the display from the camera connected with the alarm input.
If more than one alarms occurs at the same time, the images from the cameras connected to the
triggered inputs are switched sequentially. After the alarm is over the device goes back to normal
sequence display.
Attention: Alarm functions are active if at a given moment in the recordings setting menu alarm
recording is active.
