Novus NV-DVR3009 Скачать руководство пользователя страница 15

Страница: 15 / 94

NV-DVR3009 / NV-DVR3016 ver. 1.1 - User’s manual

Signalling diodes. A diode marked as

HDD

informs about disk (disks) operation.

LAN

diode informs about network connection.

AR RESET

This button allows you to cancel alarm (if menu settings allow you to do this)

/ AUTO

Pressing this button during live monitoring activates camera sequence on the main

monitor. Flickering diode above the button informs us about such a state.

In the menu configuration mode the buttons acts as a left cursor.

SETUP

Press to enter setup menu. Menu, whose description can be found in chapter No

3 , is displayed on the screen.

10.

TRIPLEX

In the playback mode this button, allows you to switch live monitoring mode on

one screen. If you access the playback menu in the split screen mode pressing

triplex button allows you to display 8 or 15 cameras in live monitoring and 1 (in

the lower right corner) playback mode. The camera in the playback mode is

marked with a red frame. It is possible to select any channel in the red-frame

window. If you access the playback menu in the full screen mode pressing triplex

button allows you to display images in the “picture in picture” mode, that is

images from a camera are displayed in the live mode, and in its background, in a

window with a red frame, images from a camera in the playback mode. In the

configuration mode. The Triplex button is used as the “up” cursor.

Pressing

TRIPLEX

button simultaneously with other buttons controls Spot

monitor: numeric b

TRIPLEX

selects channels,

COPY

TRIPLEX

switches Main monitor Signal on Spot monitor,

AUTO

TRIPLEX

switches sequence on Spot monitor.

11.

FREEZE

this button allows you to “freeze” any image from any camera both in the live and

playback mode. In order to use this function press the button (a diode above the

button lights up), next select a camera by means of a numeric buttons, images

from which will be “frozen”. It can be just one or a few cameras. Pressing numeric

button again switches the “freeze” function off. We know whether a particular

channel is “frozen” or not thanks to

caption on the monitor within a particular

channel. Pressing the freeze button again switches the function off. In the

configuration menu. The Freeze button is used as the “right” cursor.

12.

IR wave receiver. Do not obscure.

STARTING THE DEVICE

NV-DVR3016

Содержание NV-DVR3009






























































































Результаты поиска

Содержание NV-DVR3009

Отзывы:

Похожие инструкции для NV-DVR3009

Бренды по названию

Популярные бренды

Novus NV-DVR3009, Руководство пользователя

Результаты поиска

Содержание NV-DVR3009

Отзывы:

Похожие инструкции для NV-DVR3009

Бренды по названию

Популярные бренды