NV-DVR3009 / NV-DVR3016 ver. 1.1 - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
32
MULTIPLEXER’S MENU
3.3.2 Alarm Link
In the
Alarm Link Setup
submenu reactions to different alarm events and types of alarm outputs are
defined.
The settings are defined for each of the four outputs individually. The alarm output can be found at the
bottom of the window.
You select the output by means of numeric buttons: 1, 2, 3, 4.
It is possible to define the following parameters for each output independently:
•
In the
Sensor
position alarm inputs, stimulation of which causes change in the status of a given
output, are ticked. Any number of inputs can be ticked, i.e. ticking
Input 1
and
Input 4
activates
the outputs in the moment of alarm on inputs 1, or 4, or on two simultaneously. Stimulation of
other inputs does not have any influence on them.
•
In the
Events
position you tick which of the alarm events should activate a given output. The
following events are available:
♦
Disk full
- no more disk space available (it is not active if the multiplexer is recording in the
overwriting mode. Disk full bar is not visible on the screen.)
♦
Admin. PW Changed -
here you change admin password
♦
Video Loss
- no video signal on one input, chosen from the list or on any of the inputs (if
All
has been selected)
♦
Motion
- motion has been detected in the field of view of one camera, chosen from the list or in
the field of view of any camera (if
All
has been selected)
