NV-DVR3009 / NV-DVR3016 ver. 1.1 - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
14
1.
OPERATE
Switch on/off button. To switch the multiplexer on or off press the button and
hold it for about 3 seconds.
2.
Channel selection buttons (9 or 16 depending on the model). If you press a button
image from a camera, that is connected to this button, is displayed on the screen.
The image is displayed in the full screen mode. When you press the buttons in the
split screen mode, other combinations of image layout are displayed. These
buttons are also used to input user password
3.
Swappable bay cover. To open press
PUSH.
If you want to take out or put in
HDD make sure the device is switched off. To open and close the swappable bay
use the attached keys.
4.
SHUTTLE
RING
The Shuttle Ring is used to speed up playback. Playback speed varies and
may be increased or decreased by turning the ring.
JOG DIAL
Jog Dial is used to slow down playback. In the configuration mode it is used for
going in between menu positions and selecting characters.
5.
DISPLAY
Buttons grouped in the
DISPLAY
section let you choose display mode.
Pictograms below the buttons are used to select required split screen. A button
allows you to switch on user display mode (LED diode above the button
lights up). Particular user screens within a given mode are selected by means of
alphanumeric buttons from 1 to 8 (or 6 for NV-DVR3009).
6.
USB
Connector used for connecting external data carrier or mouse.
2.4 Front Panel Description
1
2
3
4
STARTING THE DEVICE
5
6
NV-DVR3016
U
