______________________________________________________________________________
Page 97
Version 6.0
______________________________________________________________________________
NovaTec
Mobile Gateway S20
There is a readme file on the CD to provide you with additional information for the installation
process. For further information you can open the on-line help on the CD by double-clicking
on the help icon or using the F1 button.
There is also a prepared standard configuration mdb file available on the CD for fast and
easy start of the system.
Remote Maintenance via IP
Please make sure that the NMG that you want to configure is connected to the same network
as the computer and that you have the necessary access rights
If this is not the case and the NMG is outside of your LAN then you need a computer with
internet capabilities.
If the CCU is in the Default status the IP Address for the CCU3 is 192.168.127.254
For configuration of the computer Please ask your System administrator
5.5
Remarks to Callback Configuration
With the Fixed Net Callback application, two NovaTec systems are used. One system
takes the role of the client and the other one of the server.
The client is installed behind or before the switch of the End customer. IT has the task of
recognizing call back calls and passing them on to the server.
After contacting the server, the call will stay in an ALERTING state i.e. ringing. The call will
stay in this stage until either the caller has aborted the call, i.e. laid down the reciever or until
the call back has been received by the client. The client recognizes the callback call and and
established the connection between the two partys.
The server waits for incoming call back calls. When a call back call is recieved and the
server has checked the call is approved (permissions, routing etc.) the call back call and
the target (dialled) number will be started simultaneously. When the target telephone
rings the incoming call activation call from the client will be disconnected. The call
costs will then be invoiced with the server end and not with the client.
Generally each NovaTec Splitter/NMG can take over both the role of the client, however the
server must be installed with the SOS board .
The ISDN network between clients and server must however fullfill certain technical
requirements.
The Requirements depend on the used call back mode on the client side.
Requirements in the
Subaddress
Mode
