Notifier UniNet 2000 Скачать руководство пользователя страница 70

Страница: 70 / 200

The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02

The system comes with a default monitoring profile defined to monitor all devices. Locations can be filtered at three

levels:

• Site.

• Node.

• Subnode.

NOTE: Any device status which is filtered from display at all workstations on the

network must also be purged from the event pool on the event manager. For more

information on event pool configuration, refer to the event manager manual.

3.1.4 Defining Monitor and Control Profiles

Monitoring and control profiles allow the operator to select what devices will be monitored and controlled by the

workstation. Each profile is defined for the specific site and application. Monitoring profiles determine what events

are seen by the workstation and control profiles select what devices are controlled by the workstation. By using

monitor and control profiles, supervision of various portions of the network can be transferred as needed based on

the schedule and needs of the site (ie. a Security workstation vs a Fire workstation).

These two types of profiles are defined by the system administrator using the tools described in the following

sections.

Monitoring Profiles

Monitoring profiles are configured event annunciation filters that block selected events from appearing on the

workstation. Filters are defined by two methods:

• Event Location.
• Event Type.

These profiles are defined using the

Event Monitor Profiles Manager

dialog located under the menu

Workstation Configuration, Profile Editors, Event Monitoring Profiles.

Figure 3-7: The Event Monitor Profiles Manager Dialog

NOTE: An open box represents a unselected item while a

check mark represents a selected item.

Monitoring
Profiles List
Box

Site

Node
Subnode

Содержание UniNet 2000









































































































































































































Результаты поиска

Содержание UniNet 2000

Отзывы:

Бренды по названию

Популярные бренды

Notifier UniNet 2000, Инструкция по установке, эксплуатации и администрированию

Результаты поиска

Содержание UniNet 2000

Отзывы:

Бренды по названию

Популярные бренды