Notifier UniNet 2000, Инструкция по установке, эксплуатации и администрированию

Страница: 24 / 200

24 The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
1.1.5 Screen Savers, Power Management and Screen Resolution
To ensure that the workstation annunciates every message; all power management functions, including CPU and
monitor sleep modes, must be disabled. No third party screen savers (i.e. After Dark) or Open GL applications
should be used; however, standard Windows screens savers may be used without loss of monitoring on computers
that have only the workstation application running (Do not run any standard Windows screen savers on servers,
event managers, or other clients such as UniLogic).
The display properties must always be set to the following:
1024 x 768, Large Fonts, 16 bit Color.
This is done through the Windows desktop properties or Control
Panel , Display properties.
Setting the Workstation to Autoboot
To activate the software whenever Windows is started, the UniNet
application must be added to the Start-up folder.
1) Open the Taskbar Properties by clicking on the Start
button, then select Settings, and then Taskbar & Start
Menu .
2) Click on the Start Menu Programs tab.
3) Click on the Add button to begin the process of adding the
UniNet Application to the Start-up folder.
4) Type the drive and path of the UniNet Application, for
example, C:\uninet\uninet.EXE . Click the Next>
button to continue.
5) Type UniNet as the name of the shortcut to the UniNet
Application. Click the
Finish
button and the
OK
button.
Figure 1-10: Accessing
Taskbar Properties
Figure 1-11: Adding UniNet to the Startup Folder