Notifier UniNet 2000, Инструкция по установке, эксплуатации и администрированию

Страница: 33 / 200

33
The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
Operator Features Setup Tab
The Operator Features Setup Tab contains configuration tools for enhancements covering operator log in and
supervision of operator performance.
Figure 1-22: System Options: Operator Features Setup
•
Use Unacked Event Supervision
- When this feature is enabled, the workstation supervises operator
acknowledgement of new events. In security circles, this feature is commonly known as a "Dead Man."
When enabled, this feature monitors the New Event box status and activity.
When an event appears in the New Event box, a timer is started which will run for a user defined time (3 -
60 min.). If the operator acknowledges an event before the timer expires, no action is taken. If any other
events are outstanding in the New Event box, the timer is reset and starts again; otherwise, it is canceled.
If the timer expires before an event is acknowledged, then a user defined macro is executed. This macro
either activates or deactivates an output on the network (also user defined). When executed, this macro
creates an event when the output is activated/deactivated. The output can be used to trip any external
device (horn, strobe, pager etc...) provided by the installer. Once all New Events are acknowledged, a
second user defined macro is executed which contains the converse commands of the first macro.
To configure this option, enter the supervision time in the
Unacked Event Timeout field. Select the
predefined macros from the list boxes for Macro Activated on Alarm and Macro Activated on
Alarm Restore . For more details on defining macros, refer to section 3.5.4 Using Macro Editor.
• Shift Change Configuration - Enabling this feature provides a simplified login in process for a four
shift operator duty cycle. Select a different operator name for each shift from the operator account pool.
Then, these operators can log in by simply clicking on the Shift Change button on the Operator
Login form, or you can assign the shift change function to a function key allowing the operators to log in
by pressing the allocated F-key. If the Automatic Shift Changes option is enabled, then assigned
operators will be logged in automatically at the times assigned for each shift.
Site Information Setup Tab
The Site Information Setup Tab allows you to add custom fields to the Site Information display . These
are text fields and can be used to add non-software related informational fields related to the site such as address,
contact numbers, special notes, etc. Fields are added here in the same manner as the Member Information
Setup Tab. Only text field types are available.