Notifier UniNet 2000, Инструкция по установке, эксплуатации и администрированию

Страница: 53 / 200

53
The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
Section 2.4: Advanced Features
2.4.1 Monitoring and Control Profiles
Monitoring and control profiles allow the operator to select what devices will be monitored and controlled by the
workstation. Each predefined setting, called a profile, is defined by the system administrator for the specific site and
application. Monitoring profiles determine what events are seen by the workstation. Likewise, control profiles select
what devices are controlled by the workstation. By using monitoring and control profiles, supervision of various
portions of the device network can be transferred as needed based on the schedule and needs of the site.
Monitoring Profiles
Monitoring profiles allow the operator to select exactly what events are seen by the workstation, organized based on
selecting specific nodes, subnodes and devices. This specific selection is the job of the system administrator, who
creates a number of profiles that can be selected by the operator. Usually these profiles are created around a
physical or operational structure, such as by building or by work shift.
In order to activate a new profile for monitoring, select Tools, Event Monitoring Selection from the pulldown
menu. This will call up the Event Monitoring Selection dialog box. On the left side of the box is a list of
currently defined monitoring profiles. Any number of profiles can be selected for activation. Select the profile(s) to
activate and click on the OK button. The workstation will now be monitoring the specified areas and/or devices.
Figure 2-22: Event Monitoring Configuration Dialog
2.4