Notifier UniNet 2000, Инструкция по установке, эксплуатации и администрированию

Страница: 28 / 200

28 The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
Column Description
# The Event Manager or Alarm Server number
Type The application type: EM=Event Manager, LAS=Local Area Server, WAS=Wide Area Server
Name The name of the computer on which the application resides
IP Address The static network IP address of the computer
Port An Ethernet parameter describing the port on which the current Event Manager resides; not configurable
State Current status of the application
Connect Time The date/time when the application began/resumed communication with the system
Connect Count The number of times that the Event manager has connected to that server
Backing Up
Denotes whether the selected application is serving as a backup of another like client. When this field is
blank, that Event Manager/Alarm Server does not back up any other.
Backed Up By Denotes whether another like client is serving as the selected application's backup
Figure 1-15: Alarm Server Connection Fields
Alarm Server Configuration
Alarm Servers must be configured so they can communicate over the network. To
configure a new Alarm Server, follow these steps:
1. Select Alarm Servers, New Connection.
Event Manager Configuration
Event Managers must be configured in the Workstation for it to
communicate with other network clients and process events.
Follow these steps to configure the Primary and optional
Secondary Event Managers:
1. From the main menu bar, select Workstation Con-
figuration , Event Managers .
2. On the Socket Connections screen, select Event
Managers , Configure , and the Event Manager
Configuration form will be displayed (see Figure 3-
3).
3. Enter the PC network name and/or IP address for the
Primary/Secondary, then click
OK
.
4. After these settings have been made, you must also
update these connections by selecting Event
Managers , Update All .
When viewing Event Manager connections in general, you
can update single Event Manager entries by highlighting the
desired EM in the list, then selecting Event Managers ,
Update Selected . To view the most updated list of con-
nections, select Refresh Display . This will reset the Socket
Connections screen and show any recent configuration
changes.
Figure 1-16: Event Manager
Configuration