Notifier UniNet 2000, Инструкция по установке, эксплуатации и администрированию

Страница: 58 / 200

58 The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
The events are also color coded with the following color scheme:
• Red : Red indicates a critical alarm. These alarms are events that generally require immediate
response and take top priority. Examples include Forced Entry, Door Ajar , and Tour Interrupted .
• Yellow : Yellow events are trouble or fault events, or their paired (inverse) events. These events usually
represent internal or system problems and often require maintenance as a response. Examples include
High Value, Prealarm , and Trouble .
• Gray : Gray events indicate resets or return to a passive/normal state. Examples include reset and
Panel Normal.
• Green : Green events are events that indicate by their presence a normal condition of operation.
Examples include Accepted, Guard Tour Read, and Request to Exit.
• Blue : Blue events are security and supervisory events. Examples include Panel Armed, Security Alarm
Restored, and Test Mode Terminated.
2.4.5 Panel Communications
The UniNet software allows the operator to communicate with a panel that supports terminal communication and is
connected to the UniNet system through a Serial NION. To communicate with a specific panel:
• Go to the screen for the site with which you would like to communicate. Keep in mind that if the site you
select is a remote site, the workstation will have to dial out to the site for the panel communications
session. These sessions will operate more slowly than a local session.
• Select Panel Communications from the Tools menu on the main screen. The Panel
Communications Session box will appear for the currently selected site (based on the current screen).
• From the bottom of the Panel Communications dialog box, select the Node, and if applicable, the
subnode with which to connect.
• Select Establish Communications Session from the Connection pull down menu item.
Figure 2-26: Panel Communications Session Box
Notifier
HVAC NION MAIN MENU
72 F ECON: ON REHEAT: ON 63 %RH
Choose 1-15 >_
The workstation will now attempt to connect to the selected panel. Once the connection is completed, the display
portion of the Panel Communications dialog will show the ASCII output from the panel, emulating a direct
terminal session. The Panel Functions menu contains a list of functions available for each specific device based
on the plug-in for that device. Fire panels will have options to Acknowledge , Silence , and Reset based on the
generic fire plug-in. Security panels will have at least Arm and Disarm , as well as other functions specific to certain
panels. Refer to each specific plug-in manual for more information on these functions.