Nortel 4050, Руководство пользователя

Страница: 805 / 922

Appendix A CLI reference 805
Nortel Secure Network Access Switch 4050 User Guide
paste
Restores a saved configuration that includes private keys. TIP : Before you paste the
configuration, you must provide the password phrase you specified when you
selected
include the private keys in the configuration dump . For more information,
see the
dump
command in “Configuration menu” on page 816 .
exit
Terminate the current session and log out. TIP : You are notified if there are unapplied
(pending) configuration changes when you execute the
exit
command. Pending
configuration changes are lost if you log out without executing the apply command.
quit
Terminate the current session and log out. TIP : You are notified if there are unapplied
(pending) configuration changes when you execute the
quit
command,. Pending
configuration chagnes are lost if you log out without executing the apply command.
Ctrl+^ Exit from the command line interface if the Nortel Secure Network Access
Switch 4050 has stopped responding.
TIP : This command should be used only when
you are connected to a specific Nortel Secure Network Access Switch 4050 through
a console connection. Do not use this command when connected to the
Management IP of the cluster through a Telnet or SSH connection.
netstat
Show the current network status of the Nortel Secure Network Access Switch 4050.
The
netstat
command provides information about active TCP connections, the
state of all TCP/IP servers, and the sockets the servers use.
nslookup
Find the IP address or host name of a machine. TIP : To use the
nslookup
command, the Nortel Secure Network Access Switch 4050 must be configured to
use a DNS server.
ping < IPaddr
or host name >
Verify station-to-station connectivity across the network. TIP : You can specify an
IP address or host name in the command. To specify host names, you must
configure the DNS parameters.
traceroute
<
IPaddr or
host name >
Identify the route used for station-to-station connectivity across the network. TIP : You
can specify an IP address or host name of the target station in the command. To
specify host names, you must configure the DNS parameters.
cur
View all the current settings for the active menu.
curb
Obtain a summary of the current settings for the active menu.
dump
Dump the current configuration for the active menu. TIP : You can cut and paste the
dumped information into the CLI of another operator at the same menu level. In all
Statistics menus, the dump command provides statistics information for the active
menu.
lines < n >
Set the number of lines ( n ) that display on the screen at one time. TIP : The default
value is 24 lines. When used without a value, the current setting displays.
Table 179
Global commands (Sheet 2 of 3)
Command Action