Nortel 4050, Руководство пользователя

Страница: 776 / 922

776 Chapter 16 The Command Line Interface
320818-A
Access to the Nortel SNAS 4050 CLI and settings is controlled through the use of
four predefined user accounts and passwords. Once you are connected to the
Nortel SNAS 4050 by a console connection or remote connection (Telnet or SSH),
you are prompted to enter a user account name and the corresponding password.
Table 175 lists the default user accounts and passwords for each access level.
Note: The default Administrator user password can be changed during
the initial configuration (see “Initial setup” on page 49 ). However, the
default passwords for the Operator user, the Boot user, and the Root user
are used even after the initial configuration. Nortel therefore
recommends that you change the default Nortel SNAS 4050 passwords
for the Operator and Root user soon after the initial configuration, and as
regularly as required under your network security policies.
For more information about how to change a user account password, see
“Changing passwords” on page 366 .
Table 175
User access levels
User Account User Group Access Level Description
Default
Password
oper oper The Operator is allowed read access to some of the
menus and information available in the CLI.
oper
admin admin
oper
certadmin
The Administrator is allowed both read and write
access to all menus, information and configuration
commands.
The Administrator can add users to all groups in which
the Administrator himself or herself is a member. The
Administrator can delete a user from any of the other
three built-in groups.
admin
certadmin By default, only the Administrator is a member of the
certadmin group.
Certadmin group rights are sufficient for administrating
certificates and keys on the Nortel SNAS 4050. A
certificate administrator user has no access to the SSL
Server menu, and only limited access to the System
menu.
boot The boot user can only perform a reinstallation of the
software, and only via a console connection.
ForgetMe
root The root user has full access to the underlying Linux
operating system, but only via a console connection.
ForgetMe