Nortel 4050, Руководство пользователя

Страница: 60 / 922

60 Chapter 2 Initial setup
320818-A
The action to be performed when the TunnelGuard check fails depends on
your selection in
step f on page 59 .
Settings created by the quick setup wizard
The quick setup wizard creates the following basic Nortel SNAS 4050 settings:
1 A Nortel SNAS 4050 domain (Domain 1). A Nortel SNAS 4050 domain
encompasses all switches, authentication servers, and remediation servers
associated with that Nortel SNAS 4050.
2
A virtual SSL server. A portal IP address, or pVIP, is assigned to the virtual
SSL server. Clients connect to the pVIP in order to access the portal.
3 A test certificate has been installed and mapped to the Nortel SNAS 4050
portal.
4 The authentication method is set to Local database.
5 One test user is configured. You were prompted to set a user name and
password during the quick setup wizard (in this example, user name and
password are both set to
tg
). The test user belongs to a group called
tunnelguard
. There are two profiles within the group:
tg_passed
and
tg_failed
. Each profile has a client filter and a linkset associated with it.
Create default tunnel guard user [no]:
yes
Using 'restricted' action for TunnelGuard failure.
User name:
tg
User password: tg
Creating client filter 'tg_passed'.
Creating client filter 'tg_failed'.
Creating linkset 'tg_passed'.
Creating linkset 'tg_failed'.
Creating group 'tunnelguard' with secure access.
Creating extended profile, full access when tg_passed
Enter green vlan id [110]: < VID >
Creating extended profile, remediation access when
tg_failed
Enter yellow vlan id [120]:
< VID >
Creating user 'tg' in group 'tunnelguard'.
Initializing system......ok
Setup successful. Relogin to configure.