Nortel 4050, Руководство пользователя

Страница: 527 / 922

Chapter 10 Configuring system settings 527
Nortel Secure Network Access Switch 4050 User Guide
The Add Access Host dialog box appears (see Figure 144 ).
Figure 144
Add Access Host
3
Enter the access host information in the fields provided. Table 104 describes
the Add Access Host fields.
4 Click Add .
The new host appears in the table. An index number is automatically assigned
to the entry.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Removing an Access List entry
To remove an existing entry from the access list, perform the following steps:
1
Select the System > Access List tab.
The Access List Table appears (see Figure 143 on page 526 ).
2 Select an entry from the Access List Table to remove.
3 Click Delete .
A confirmation dialog appears.
Table 104
Add Access Host fields
Field Description
IP Address Specifies the IP address of the host to be allowed access.
Network mask Specifies the subnet mask. You can set the mask to specify
a single machine or a range of machines on a specific
network.