Nortel 4050, Руководство пользователя

Страница: 542 / 922

542 Chapter 10 Configuring system settings
320818-A
Removing an existing RSA server
To remove an existing RSA server, perform the following steps.
1
Select the System > Servers > RSA Server Table tab.
The RSA Server Table appears (see Figure 152 ).
2 Select the RSA server entry to remove from the RSA Server Table .
3 Click Delete .
A dialog box appears for confirmation.
4
Click Yes .
The RSA server entry disappears from the RSA Server Table.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Removing the RSA node secret
You can remove the RSA node secret, if necessary. Authentication will then fail
until the
Node secret created check box is unchecked in the Edit Agent Host
window on the RSA server.
To remove the RSA node secret, perform the following steps:
1
Select the System > Servers > RSA Server Table tab.
The RSA Server Table appears (see Figure 152 on page 540 ).
2 Select the RSA server entry from the RSA Server Table .