Nortel 4050, Руководство пользователя

Страница: 245 / 922

Chapter 6 Configuring authentication 245
Nortel Secure Network Access Switch 4050 User Guide
Figure 56 shows sample output for the RADIUS method for the
/cfg/domain 1/aaa/auth < auth ID >
command and commands on the
Authentication menu.
Figure 56
Authentication menu commands — RADIUS
Modifying RADIUS configuration settings using the CLI
To modify settings for the authentication method itself, see “Configuring
authentication methods using the CLI” on page 239 .
To modify settings for the specific RADIUS configuration, use the following
command:
/cfg/domain 1/aaa/auth #/radius
>> Main#
/cfg/domain 1/aaa/auth
Enter auth id: (1-63)
2
Creating Authentication 2
Select one of radius, ldap or local:
radius
Auth name:
radius
Entering: RADIUS settings menu
Entering: RADIUS servers menu
IP Address to add:
< IPaddr >
Port (default is 1812):
Enter shared secret:
< secret >
Leaving: RADIUS servers menu
Enter vendor id for group [alteon]:
Enter vendor type for group [1]:
Enter vendor id for domain [alteon]:
Enter vendor type for domain [3]:
Leaving: RADIUS settings menu
---------------------------------------------------------
[Authentication 2 Menu]
type - Set authentication mechanism
name - Set auth name
display - Set auth display name
radius - RADIUS settings menu
adv - Advanced settings menu
del - Remove Authentication
>> Authentication 2#