Nortel 4050, Руководство пользователя

Страница: 235 / 922

Chapter 6 Configuring authentication 235
Nortel Secure Network Access Switch 4050 User Guide
Before you begin
Before you configure authentication on the Nortel SNAS 4050, you must
complete the following tasks:
1 Create the Nortel SNAS 4050 domain, if applicable (see “Creating a domain
using the CLI” on page 121 or “Creating a domain using the SREM” on
page 151 ).
If you ran the quick setup wizard during initial setup, Domain 1 has been
created on the Nortel SNAS 4050.
2 Create and configure the groups (see “Configuring groups and profiles” on
page 191 ).
3
For external authentication servers, create or modify settings on the external
server as required.
a
A free RADIUS server may require specific settings in the clients.conf
file and the Users file to match group parameters you may have
configured on the Nortel SNAS 4050.
b A Steel-belted RADIUS server requires specific settings in the vendor.ini
file, master dictionary, and vendor dictionary.
c An MS IAS RADIUS server may require vendor parameters to be
configured on the Microsoft Management Console (MMC).
4
To configure external authentication, you require the following information
about the authentication server configuration:
a
RADIUS servers:
— server IP address
— port number used for the service
— shared secret
— Vendor-Id attribute
Note:
With Nortel Secure Network Access Switch
Software Release 1.0, you cannot configure the Nortel SNA solution to
have more than one domain.