Nortel 4050, Руководство пользователя

Страница: 298 / 922

298 Chapter 6 Configuring authentication
320818-A
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Next steps
1 Configure additional authentication methods, if desired (see “Configuring
RADIUS authentication using the SREM” on page 271 or “Configuring local
database authentication using the SREM” on page 298 ).
2 Set the authentication order (see “Specifying authentication fallback order
using the SREM” on page 314 ).
3
Commit the changes (see “Saving authentication settings” on page 316 ).
Configuring local database authentication using the SREM
To configure the Nortel SNAS 4050 to use a local database for authentication,
perform the following steps:
1 Add the Local method to the domain and create the local database (see
“Adding the Local method” on page 299 ).
2
Populate the database (see “Populating the database” on page 301 ).
3
Modify the local database settings, if desired (see “Modifying Local database
configuration” on page 305 ).
4 Export the local database, if desired (see “Exporting the database” on
page 312 ).
Note: If you ran the quick setup wizard during initial setup, Local
database authentication has been created with authentication ID = 1. The
database contains one test user (
tg
), who belongs to a group called
tunnelguard
. To continue configuring the local database, go to
“Populating the database” on page 301 .