Nortel 4050, Руководство пользователя

Страница: 752 / 922

752 Chapter 14 Maintaining and managing the system
320818-A
The command resets the device to its factory default configuration. All
IP configuration is lost. The software itself remains intact. After executing the
delete command, you can only access the device using a console connection
and performing the initial setup.
If you receive a warning that the device you are trying to delete has no contact
with any other master Nortel SNAS 4050 device in the cluster, also connect to
the MIP and delete the Nortel SNAS 4050 device from the cluster by using the
delete command on the
System > Hosts screen.
The delete command on the Reboot/Delete ISD Options tab is primarily
intended for when you want to delete a Nortel SNAS 4050 device in one of
the following situations:
• The device has become isolated from the cluster,
• The device has been physically removed from the cluster without first
executing the delete command on the
System > Hosts screen.
Downloading files using the SREM
To download files to the Nortel SNAS 4050 using the SREM, select the File
Download tab.