Nortel 4050, Руководство пользователя

Страница: 481 / 922

Chapter 10 Configuring system settings 481
Nortel Secure Network Access Switch 4050 User Guide
The RSA Servers menu includes the following options:
Configuring syslog servers using the CLI
The Nortel SNAS 4050 software can send log messages to specified syslog hosts.
For descriptions of the log messages that the Nortel SNAS 4050 can send to a
syslog host, see
Appendix B, “Syslog messages,” on page 851 .
To configure syslog servers for the cluster, use the following command:
/cfg/sys/syslog
The Syslog Servers menu displays.
/cfg/sys/rsa
followed by:
rsaname < name >
Sets the symbolic name of the RSA server.
import < protocol >
< server > < filename >
[< FTP user name > < FTP
password >]
Imports a copy of the sdconf.rec file from the
specified TFTP/FTP/SCP/SFTP server.
• protocol is the import protocol. Options are
tftp|ftp|scp|sftp.
• server is the host name or IP address of the
server.
• filename is the name of the sdconf.rec file
on the server.
The sdconf.rec file is a configuration file that
contains critical RSA ACE/Server information. Contact
your RSA ACE/Server administrator to obtain the file
and make it available on the specified
TFTP/FTP/SCP/SFTP server.
rmnodesecr
Removes the RSA node secret, if necessary.
Authentication will then fail until the
Node secret
created check box is unchecked in the Edit Agent
Host window on the RSA server.
del
Deletes the current RSA server information.