62
| 11.2019
Assembly
Rocker circular saw 46-217 and 46-218
Mounting the wheels
›
Place the wheels on the rocker circular saw axles on each side.
›
Secure the wheels with a washer and a circlip.
Setting up the transport protection
›
Press the rocker in the direction of the saw blade.
The safety hook of the support release and the support can now be
positioned.
›
Place the support so that it stops the axle.
The rocker is put into the rest position automatically by the return
spring.
›
Attach the support to the axle using the locking pins of the chain.
Mounting the terminal box
Variant 46-217/230 V
›
Attach the terminal box to the bracket intended for this with
the 2 washers and screws.
Variant 46-218/400 V
›
Attach the terminal box to the bracket intended for this with
the 2 washers and screws.
Fig. 6:
Mounting the
wheel
Fig. 7:
Setting up the
support
Fig. 8:
Fastening the
chain
Fig. 9:
Mounting the
terminal box