54
| 11.2019
Safety instructions
Rocker circular saw 46-217 and 46-218
Fig. 1:
EMERGENCY STOP button on the 46-217 (left) and 46-218 (right)
variants
›
Disconnect the rocker circular saw from the power supply.
›
Have the malfunctions rectified by the specialist dealer.
In case of a fire on the electrical equipment of the rocker circular saw:
›
Only use extinguishers that are approved for this (e.g. powder
extinguishers).
Safety devices
All safety devices must remain on the rocker circular saw and must
never be rendered unserviceable. If safety devices are put out of
operation, modified or changed, operating personnel may be injured.
Motor protection switch
The motor is equipped with a motor brake which stops operation
automatically in the event of an overload. Operation can restart after
5-10 minutes when the motor has cooled down.