38
| 11.2019
Störungen
Wippkreissäge 46-217 und 46-218
Störung
Ursache
Beseitigung
Die Säge vibriert.
Das Sägeblatt ist
verformt.
›
Tauschen Sie das Säge-
blatt aus oder lassen Sie
es schärfen (siehe „Säge-
blatt austauschen“ auf
Seite 30).
Das Sägeblatt ist nicht
richtig montiert.
›
Kontrollieren Sie den
Sitz des Sägeblatts und
korrigieren Sie, wenn
notwendig (siehe „Trans-
portsicherung aufstellen“
auf Seite 20).
Die Bremswirkung ist zu
niedrig (Bremszeit > 10 s)
Die Motorbremse ist
defekt.
›
Lassen Sie die Motor-
bremse von einem
autorisierten Elektriker
prüfen/reparieren, bzw.
lassen Sie sie gegen
ein originales Ersatzteil
austauschen.
Die Bremsscheibe ist
abgenutzt.
Der Motor wird nach
kurzer Zeit heiß. An der
Schnittstelle bilden sich
Schmauchstellen.
Das Sägeblatt läuft
verkehrt herum.
›
Der Phasenwender im
Stecker muss gedreht
werden.