20
| 11.2019
Montage
Wippkreissäge 46-217 und 46-218
Räder montieren
›
Setzen Sie auf jeder Seite das Rad auf die Achse der Wippkreissäge.
›
Sichern Sie die Räder mit jeweils einer Unterlegscheibe und einem
Sprengring.
Transportsicherung aufstellen
›
Drücken Sie die Wippe in Richtung Sägeblatt.
Der Sicherungshaken der Stütze löst sich und die Stütze ist nun
positionierbar.
›
Stellen Sie die Stütze so auf, dass sie die Achse hält.
Die Wippe wird von der Rückfeder automatisch in die Ruheposition
gebracht.
›
Befestigen Sie die Stütze mithilfe des Arretierungsbolzens der Kette
an der Achse.
Anschlusskasten montieren
Variante 46-217/230 V
›
Befestigen Sie den Anschlusskasten mit jeweils 2 Unterlegschei-
beiben und Schrauben an der dafür vorgesehenen Halterung.
Variante 46-218/400 V
›
Befestigen Sie den Anschlusskasten mit jeweils 2 Unterlegschei-
beiben und Schrauben an der dafür vorgesehenen Halterung.
Abb. 6:
Rad montieren
Abb. 7:
Stütze aufstellen
Abb. 8:
Kette befestigen
Abb. 9:
Anschlusskasten
montieren