49
| 11.2019
Safety instructions
Rocker circular saw 46-217 and 46-218
Intended use
The rocker circular saw is a machine that may only be used for
cutting wood by the metre crosswise in the direction of the grain. The
performance limits and maximum speed of the rocker circular saw must
always be observed (see “Technical specifications” on page 80).
The machine must be prepared, used and kept in good condition as
described in this manual.
Observe the dimensions of the wood pieces to be prepared as the wood
pieces cannot be held in the rocker circular saw otherwise (see chapter
“Technical specifications” on page 80).
Only use accessories and spare parts which are approved for operating
the rocker circular saw (see chapter “Accessories and spare parts” on
page 82).
The rocker circular saw is approved for use by gatherers in the private
sector. It is intended exclusively for 2-handed operation. Two or more
persons must never operate the rocker circular saw.
Intended use also includes reading and understanding this manual
completely, and in particular the chapter “Safety instructions” on page
48.
Improper use
Any improper use is prohibited. Improper use includes
• converting, modifying or disabling handling,
• removing or modifying safety devices,
• reversing the rotational direction of the saw blades,
• any other use of the rocker circular saw apart from those uses
described in the chapter "Intended use",
• using the rocker circular saw under operating conditions that depart
from those specified in this manual.
Improper use of the rocker circular saw voids all guarantee claims.
The manufacturer is not liable for damage to the rocker circular saw or
for personal injuries that result from improper use.
EN