Ness 16-channel models Скачать руководство пользователя страница 83

Страница: 83 / 97

Digital Video Recorder

Appendix

USB Hard Disk Drive Preparation

Preparing the USB hard disk drive in Windows 2000

NOTE: Preparing a USB hard disk drive under Windows XP, Window Vista and Window 7 is almost identical to

Windows 2000.

Connect the USB hard disk drive to your computer using the USB Cable.

Turn on your computer.

The USB device icon should display on the Taskbar.

If the USB hard disk drive is partitioned or has data, it will show up in

My Computer

as a hard disk drive

icon. Check the file system by right clicking on the icon and checking under

Properties

General

File

System.

If the file system is NOT FAT32 format, format the USB hard disk drive using the FAT32 format.

If the USB hard disk drive is not partitioned, go to

Administrative Tools

Control Panel

and launch

Computer

Management.

Open

Disk Management

Storage

and right click an unallocated region of the USB hard

disk drive. Then, click

Create Partition.

In the

Create Partition wizard

, click

Next

then

Primary Partition

, and follow the instructions on the screen.

Make sure that the FAT32 is selected for the file system.

NOTE: The partition size should be less than 32GB because of Microsoft limitations.

After formatting is complete, the USB hard disk drive will be added to

My Computer

7. Connect the USB hard disk drive to the DVR.

Preparing the USB hard disk drive in Windows 98

NOTE: Preparing a USB hard disk drive under Windows ME is almost identical to Windows 98.

Connect the USB hard disk drive to your computer using the USB Cable.

Turn on your computer. The

Add New Hardware wizard

window will appear.

Install the device driver for the USB backup device following the instructions provided with your USB hard
disk drive.

If the USB hard disk drive is partitioned or contains data, it will show up in

My Computer

as a hard disk

drive icon. Check the file system in

Properties

General

File System.

If the file system is NOT FAT32

format, format the USB hard disk drive with FAT32 format.

Run the FDISK utility by clicking

Start

then

RUN

. Type “fdisk” and click OK.

When the MS-DOS command prompt appears, type “Y” and hit the enter key.

In the FDISK Option menu, choose

“5. Change current fixed disk drive.”

Choose the appropriate letter corresponding to the USB hard disk drive.

In the FDISK Option menu, choose

“1. Create DOS partition or Logical DOS Drive.”

10.

In the Create DOS Partition or Logical DOS Drive menu, choose

“1. Create Primary DOS Partition.”

And

Type “Y” to use all available space and hit the enter key. Hit ESC to exit the screen after the USB hard disk
drive partition is created.

11.

Restart your computer and verify the newly created drive is in

My Computer

12.

Right click the newly created hard disk drive icon and select

“Format”

13.

In the Format Screen, select

“Full”

as the

“Format type”

and click

“Start”

14.

After formatting is complete, connect the USB hard disk drive to the DVR.

Содержание 16-channel models


































































































Результаты поиска

Содержание 16-channel models

Отзывы:

Похожие инструкции для 16-channel models

Бренды по названию

Популярные бренды

Ness 16-channel models, Руководство пользователя

Результаты поиска

Содержание 16-channel models

Отзывы:

Похожие инструкции для 16-channel models

Бренды по названию

Популярные бренды