NEC N8100-1220F, Руководство пользователя

Страница: 87 / 494

Setting Up Your Server 3-11
5.
Fix the slide rail assembly with four screws (A) (two on each of the front and rear sides)
and four washers (A) (two on each of the front and rear sides).
OK NG
NOTES:
„
Make sure that the frame tips on the slide rail assembly are contact
to the rectangular hole frames of the rack properly and the four
screw holes of the rail can be seen through the mating rectangular
holes of the rack
„
Check that the slide rail assembly is located to the level.
6.
Install the other slide rail assembly on the left side of the rack in the same procedure as
that described by steps 7 to 8 above.
NOTE:
Make sure that the slide rail assembly is installed at the same
level as the other slide rail assembly already installed.