APPENDIX E REVISION HISTORY
User’s Manual U16898EJ3V0UD
406
(3/3)
Page Description
p. 257
Modification of
Figure 16-6. Example of Software Processing After Release of Reset (1/2)
pp. 259, 260
Modification of description and configuration in
CHAPTER 17 OPTION BYTE
p. 259
Modification of
Caution
in
Figure 17-2. Format of Option Byte (1/2)
p. 260
Addition of
Remark 3, 4
to
Figure 17-2. Format of Option Byte (2/2)
p. 262
Modification of and addition to
18.1 Features
p. 266
Figure 18-2. Environment for Writing Program to Flash Memory
is divided into two figures, in the case of
FlashPro4 and in the case of PG-FPL2
p. 269
Modification of
Caution
in
Table 18-5. Oscillation Frequency and PG-FP4 GUI Software Setting Value
Example
p. 267 in old
edition
Deletion of
18.7.1 Flash memory programming mode
p. 271
Modification of
18.7.2 Communication commands
p. 276
Modification of and Addition to
18.8.2 Cautions on self programming function
p. 279
Addition of
<Setting conditions>
in
3. Operating conditions of WEPRERR flag
of
18.8.3 Registers used
for self programming function (3)
p. 280
Addition of description to
Figure 18-15. Format of Flash Programming Command Register (FLCMD)
p. 281
Modification of
Caution
in
Figure 18-16. Format of Flash Address Pointer H/L (FLAPH/FLAPL)
p. 281
Modification of
Caution
1, 2
in
Figure 18-17. Format of Flash Address Pointer H/L Compare Registers
(FLAPHC/FLAPLC)
p. 327 in old
edition
Complete revision of
CHAPTER 20 ELECTRICAL SPECIFICATIONS (TARGET VALUES)
, and addition of
chapters
p. 371
Addition of
CHAPTER 24 PACKAGE MARKING INFORMATION
p. 372
Addition of
CHAPTER 25 RECOMMENDED SOLDERING CONDITIONS
p. 377
Addition of included software tools to
A.1 Software Package
p. 387
Addition of
APPENDIX D LIST OF CAUTIONS
