NAC Image Technology MC-529, Руководство пользователя

Страница: 44 / 180

(00235) 2-16
2.8.2 Loop Playback (LOOP Mode)
■
Loop Playback Method
Continually press PLAY . Or press PLAY twice.
During the STOP mode, continually press PLAY
or press PLAY again during the PLAY mode to
access the LOOP mode (Figure 2-27, 28). Recorded images are played back in a loop. With loop playback,
the set playback range is played back repeatedly.
To stop loop playback, press STOP or press the dial ( ).
■
Image Display
In the LOOP mode, the recorded image is played
back in a loop. Information is superimposed at the
bottom and top of the screen and the camera mode
(Status) is displayed as "LOOP" (Figure 2-24).
The frame number for the image played back is
displayed on the frame counter (Frame).
■
J-PAD3 Display
The status screen is shown in Figure 2-27, and
the camera mode "LOOP" is displayed. The
recording conditions for photographing are shown
on the status screen during the LOOP mode.
The frame number for the image played back is
shown in the frame counter (FRAME).
The recording time for the image played back is
shown in the frame time (TIME).
There will be a mark showing the playback frame
position on the playback range bar. This mark will
move to the end frame position for playback
(recording) and then it will jump to the 1st frame and
replay.
Figure 2-26 Image Display (LOOP Mode)
Figure 2-27 J-PAD3 Display (LOOP Mode)
1st frame
position
Current playback
frame position
Last frame
position