NAC Image Technology MC-529, Руководство пользователя

Страница: 75 / 180

(00235) 3-23
3.2.14.4.3 NORMAL(L)
Figure 3-33 shows how to switch modes with the J-PAD3 during NORMAL(L) recording (top of the figure)
and saving in the memory (bottom of the figure). NORMAL(L) refers to normal recording in LOOP mode.
The sequence for segmenting the memory into four memory segments and performing NORMAL(L)
recording for all of the memory segments is shown below.
SEGMENT 2 SEGMENT 3 SEGMENT 4 SEGMENT 1
ARM REC ARM REC ARM REC ARM REC
STOP VIEW
automatic switching of the Camera mode and Segment
switching of the Camera mode with the JPAD3 operation
Figure 3-33 Normal Recording (NORMAL(L), Number of Segments
：
4)
1) Verify that the MEMRECAM GX-3 is in the STOP mode.
2) While in the STOP mode, press VIEW/ARM
on the J-PAD3 to switch to the VIEW mode.
The memory segment number (SEG) superimposed on the image is
displayed as "L". Settings in LOOP mode are displayed.
3) While in the VIEW mode, press VIEW/ARM on the J-PAD3 to switch to the ARM mode. While the
images are overwritten to the appropriate memory segment (SEGMENT1), it awaits trigger input.
4) While in the ARM mode, press TRIG
on the J-PAD3 or use the external trigger for input to switch to
the REC mode. Recording will end according to the set trigger timing.
5) Once recording to the appropriate memory segment (SEGMENT1) has been completed, it switches to
the next memory segment (SEGMENT2) and automatically switches from the REC mode to the ARM
mode.
6) Recording
in 4)
～
5) is repeated, and once recording to all of the memory segments has been completed,
it switches to the top memory segment (SEGMENT1) and it automatically switches from the REC mode
to the ARM mode.
The recording operation in 6) can be repeated while subsequent images are overwritten. Press STOP
to stop recording.
* Press
STOP even when recording to the appropriate memory segment has not been completed to
stop recording. Depending on the camera mode when STOP is pressed, the number of frames
saved before recording is stopped will vary.
・
If STOP is pressed during the ARM mode
If the custom setting for the trigger timing is +100%, recording stops when the same number of
frames is saved.
・
If STOP is pressed during the REC mode
Recording stops after saving from the frame where recording was started to the frame at the instant
STOP
was pressed.