NAC Image Technology MC-529, Руководство пользователя

Страница: 90 / 180

(00235) 3-38
3.2.15 Synchronized Timing Selection (SYNC TIME)
While in the STOP mode, the synchronize timing can be selected from the SYS MENU on the J-PAD3.
The MEMRECAM GX-3 can be synchronized with the time on the timer of the device where connected.

Camera Synchronized Time
Synchronized timing with the internal camera timer. Select if the MEMRECAM GX-3 is used
alone or if there is no need for precise synchronization. If a control PC is connected,
synchronization with the PC time is possible.

GX-HUB Synchronized Time
Synchronized timing with the internal GX-HUB timer. Select if there are multiple camera
connections using the GX-HUB. If a control PC is connected, synchronization with the PC time is
possible.

IRIG Synchronized Time
Synchronized timing with the IRIG-B time code. Select from the following.
・
If the MEMRECAM GX-3 used alone and the IRIG-B time code is input from the J3 cable
IRIG-B connector
・
If multiple cameras are connected using the GX-HUB and the IRIG-B time code is input to the
GX-HUB
・
If multiple cameras are connected to the MEMRECAM GX-3 and another camera from the
MEMRECAM series, and the GX-HUB is connected to the M-HUB, and the IRIG-B time code
is input to the M-HUB
3.2.15.1 Setting Method
1) While in the STOP mode , press MENU to display the
TOPTOP MENU.
2) Use the arrows to select “SYS MENU” from the TOP
MENU , and then press SET to display SYS MENU.
3) Use the arrows to select “SYNCTIME” from the SYS
MENU
（
Figure 3-45
）。
4) Use the arrows to select the synchronized time.
ASYNC Synchronized with the internal timer of the camera
GX-HUB Synchronized with the internal timer of the GX-HUB
IRIG Synchronized with the IRIG-B time code
Refer to the
【
GX-HUB User's Manual
】
for multiple connections using the GX-HUB.
3.2.15.2 IRIG Synchronized Time
Confirm whether or not the time is synchronized with the IRIG-B time code on the VIEW screen.
1) While in the STOP mode, press VIEW/ARM on the J-PAD3
to switch to the VIEW mode.
2) If "
Ⅰ
" is displayed in green in the frame counter superimposed
over the image, it is synchronized to the standard timing of the
IRIG-B time code.
3) If "
Ⅰ
" is displayed in red, the IRIG-B time code is not input
properly.
Figure3-45 SYNC SEL