NAC Image Technology MC-529, Руководство пользователя

Страница: 24 / 180

(00235)
1-8
２）
Status LED
There are five status LEDs on the rear panel showing the status of the MEMRECAM GX-3. The color
displayed for each LED and the flashing status changes according to the change in status. (Table 1-3).
Table 1-3 LED Status Display
LED Name Display Color and Flashing Status MEMRECAM GX-3 Status
UB
(USB) Lit green Bus power supply
Not lit Bus power OFF
ET
(ETHERNET)
Lit green Connected to network
Flashing green Communicating with network
Not lit Not connected to network or Power OFF
CM
(CAMERA
MODE)
Lit blue STOP mode
Lit white VIEW mode
flashing white
VIEW mode
(during EST synchronized signal recording)
Lit magenta ARM mode
flashing magenta
ARM mode
(during EST synchronized signal recording)
Lit orange REC mode
flashing orange
REC mode
(during EST synchronized signal recording)
Not lit Power OFF
PW
(POWER)
Lit green Power ON (normal status)
Lit red Power ON (fail status
(*1)
)
Not lit Power OFF
MB
(MEMORY
BACKUP)
(*2 ）
Lit green
Valid memory backup, Charge: High
(backing up with external power)
Flashing green
Valid memory backup, Charge: High
(backing up with battery)
Lit orange
Valid memory backup, Charge: Medium
(backing up with external power)
Flashing orange
Valid memory backup, Charge: Medium
(backing up with battery)
Lit red
Valid memory backup, Charge: Low
(backing up with external power)
Flashing red
Valid memory backup, Charge: Low
(backing up with battery)
Not lit No memory backup data
(*1)
Fail status: During MEMRECAM GX-3 operation, indicates a malfunction detected, an abnormal
power voltage detected or an increase in the sensor temperature detected.
(*2)
The charge amount is impacted by differences in batteries and the ambient temperature, and is not
precisely displayed.
Use only as a guide.
３）
Battery Case
There is a memory backup battery in the battery case on the bottom plate. Please refer to
【
7.4.4 Memory Backup
】
for specifications and use of the battery.