SnapShot
Extra
/
Extra black
SnapShot
Mobil
/
Mobil black
5.1
www.doerrfoto.de
10 DÖRR GmbH
• Postfach 1280 • 89202 Neu-Ulm/Germany • Fon +49 731 97037-0 • Fax +49 731 97037-37 • [email protected]
GB
Quick Guide
1) Open the camera using the lateral brackets
2) Make sure that the camera is always switched “OFF”, when changing batteries or SD card
3) Insert 12 x AA/1,5 V batteries (mind polarity)
4) Insert unlocked SD card
5) Move “ON/OFF“ switch to “setup“ position. Display shows settings and real time images
•
Camera symbol
Single shot mode
•
5M
Resolution 5 Mega Pixels
•
Battery symbol
Battery status
•
SD Memory Card Symbol
SD Memory Card is inserted
•
[00034/00965]
Stored pictures / free capacity
Camera settings (CAM)
Camera Mode:
choose between photo or video (
,
, ok)
Resolution:
either choose 3M or 5M or 8M or 12M (
,
, ok)
Number of shots:
choose 1 to 3 shots per motion (
,
, ok)
Video quality:
select VGA quality (640x480 pixels) or QVGA (320x240 pixels) (
,
, ok)
Video length:
can be set from 1 up to 60 seconds (
,
, ok)
Motion Detector Settings (PIR)
PIR sensitivity:
choose the sensitivity (high, normal, low) or turn sensor off (
,
, ok)
PIR Interval:
Select time (1 sec to 60 min) when PIR sensor is deactivated after a shot. If camera is in send mode, please make sure that
you allow an interval of at least 3 minutes, because the camera needs this time frame in order to send the picture.
Time Interval:
Set time interval of camera. Shoots photos during time set (5sec to 8h) If set “OFF” the camera triggers upon motion
Timer:
Camera is on standby mode during desired time. Outside this time camera does not take photos and does not react to motion
(same for “timer interval” mode ). After setting time camera only works during time frame.
GSM Setup (available for camera models Mobil and Mobil black only)
In order to setup the GSM functions both, SIM and SD card have to be inserted. The data such as address,
cell phone number and GSM and MMS parameters can easily be setup on the PC!
Instruction Manual
Flash
Infrared
PIR Sensor
Lens
ON/OFF Switch
External
V- Connection
USB
SD Memory
Card Slot
Battery
Compartment
SIM Card
Slot
Setup
In order to change settings switch to “setup” and press menu. A list of various menu items appears.
1) Press
and
to select between the registers (CAM, PIR, SYS), register (GSM) only in MOBIL versions
2) Press
and
to select a menu item within the registers
3) Press
and
to change the menu items
4) Save settings with the “ok” button and leave setup with “menu” button
2“ Colour
Display
