NAC Image Technology MC-529, Руководство пользователя

Страница: 115 / 180

(00235) 4-3
4.2 Save Settings
Save settings in Table 4-1 are described as follows.
4.2.1 Save Frame Range Settings (SAVE FRM)
While in the STOP mode, the save frame range settings can be accessed from the JPAD3 SAVE MENU.
1) While in the STOP mode, press MENU to display the
TOP MENU.
2) Use the arrows to select "SAVE MENU" from the
TOP MENU and press SET to display the SAVE MENU.
3) Use the arrows to select "SAVE FRM" from the SAVE
MENU and press SET (Figure 4-2).
4) Use the arrows to move columns and use the arrows
to change the numerical value.
The start save frame code
・
number is before the
“－”
and the
end save frame code
・
number is after the
“－”
.
5) Press SET again to set the save frame range.
Set the save frame range so it does not exceed the frame number displayed on the SAVE MENU.

FREE FRM
Depending on the capacity of the external storage media memory connected to the J2 cable
USB connector, the number of frames that can be saved is displayed.

REC FRM
The range for the number of frames recorded is displayed.
Figure 4-2 SAVE FRM