NAC Image Technology MC-529, Руководство пользователя

Страница: 72 / 180

(00235) 3-20
3.2.14.2 LOOP Mode
The LOOP mode has a function that automatically performs memory segment switching when recording
stops and switching from the REC mode to the ARM mode. It is different from the AUTO mode in that there
is no memory protection for memory segments upon the completion of recording. Images are overwritten
when memory segments are switched so repeated recording can be performed.
Recording is repeated until STOP is pressed.
。
CAUTION
）
It takes about 4.5 seconds for the automatic switching of memory segments. Since
triggersinput during this time may be ignored, input the trigger after verifying that you are in
the ARM mode.
3.2.14.3 Setting Method
1) While in the STOP mode, press MENU to display the
TOP MENU.
2) Select "TRIG SET" from the TOP MENU using the arrows
and press SET to display the TRIG SET
sub-menu (Figure3-30).
3) Select "REC MODE" and use the arrows to select the
recording method.
NORMAL Normal recording
NORMAL(A) Normal recording in AUTO mode
NORMAL(L) Normal recording in LOOP mode
EVENT
Event recording
EVENT(A) Event recording in AUTO mode
EVENT(L) Event recording in LOOP mode
BURST Burst recording
BURST(A) Burst recording in AUTO mode
BURST(L)
Burst recording in LOOP mode
MULTI(A) Multi trigger recording in ALL BLOCKS mode
MULTI(C) Multi trigger recording in CONTINUOUS mode
MULTIS(A) Multi trigger recording in AUTO mode
MULTIS(L)
Multi trigger recording in LOOP mode
4) When selecting multi trigger recording, select "BLOCKS" to
set the number of memory block segments.
-
ⅰ
) Select "BLOCKS" and press SET .
-
ⅱ
) Use arrows to move columns and use arrows to change the numerical value (1
～
16).
-
ⅲ
) Press SET again to set the number of blocks for multi trigger recording.
Figure 3-30 REC MODE(TRIG SET)