NAC Image Technology MC-529, Руководство пользователя

Страница: 69 / 180

(00235) 3-17
3.2.12 Memory Segment Settings (SEG SIZE)
While in the STOP mode, the number of memory segments can be set from the SYS MENU on the
J-PAD3.
The recording memory can be segmented into a maximum of 16 memory segments (4GB Model). The
recording time for segmented memory segments shortens according to the number of segments but
separate recording scenes can be saved for the number of segments. Also, the recorded images for
multiple scenes can be retained and downloaded together afterwards.
The photographic conditions for each memory segment can be changed for recording.
CAUTION) Images recorded in the memory are erased when the memory segments are set. Conduct
memory segmenting after verifying whether or not erasing is acceptable.
The images required should be shaved on USB compatible recording media or on the control
PC. Refer to
【
2.9 Saving
】
or
【
GXLink User's Manual
】
for the method of saving images.
1) While in the STOP mode, press MENU to display the
TOP MENU.
2) Select "SYS SET" from the TOP MENU using the arrows
and press SET to display the SYS SET
sub-menu (Figure 3-26
）
.
3) Select "SEG SIZE" and select the number of memory
segments using the arrows .
＜
Memory 2GB model
＞
2.1GBX1 No memory segmentation
1GBX2 Segment into two 1GB segments
532MB X4 Segment into four 512MB segments
266MB X8 Segment into eight 256MB segments
＜
Memory 4GB model
＞
4.2GBX1 No memory segmentation
2.1GBX2 Segment into two 2.1GB segments
1GBX4 Segment into four 1GB segments
532MB X8 Segment into eight 512MB segments
266MB X16 Segment into sixteen 256MB segments
4) Once the number of memory segments is selected, a
verification message verifying the memory segmentation will
be displayed (Figure 3-27).
If there are no problems erasing the images saved in the
memory, press SET to segment the memory.
Figure 3-26 SYS SET
Figure 3-27 Verification message