NAC Image Technology MC-529 Скачать руководство пользователя страница 126

Страница: 126 / 180

(00233)

5-8

5.2.5 Display/hide the superimposed information by the camera mode

(OSD MODE)

You can set display/hide the superimposed information on the image (OSD: On Screen Display) by

camera mode.

1) While in the STOP mode, press MENU

to display the

TOP MENU.

2) Use the arrows

to select "SYS MENU" from the TOP

MENU and press SET

to display the SYS MENU.

3) Use the arrows

to select "OSD MODE" from the SYS

MENU (Figure 5-7).

4) Use the arrows

to select Display/do not display

superimposed information by the camera mode. (Figure 5-9).

ALWAYS

Display information superimposed with all cameras mode

STOP

Display information superimposed only at the time of STOP mode

5.2.6 Trigger clock settings (OSD TIME)

At Trigger of superposition information, I can set it as an image at a trigger time display or the present

time display (only VIEW, ARM, and REC mode).

5) While in the STOP mode, press MENU

to display the

TOP MENU.

6) Use the arrows

to select "SYS MENU" from the TOP

MENU and press SET

to display the SYS MENU.

7) Use

the

arrows

to select "OSD TIME" from the SYS

MENU (Figure 5-7).

8) Use the arrows

to select trigger clock setting. (Figure

5-10).

TRIG

Display trigger time

CRNT

In VIEW, ARM, and REC mode, I display the present time.

(In STOP, PLAY, and LOOP mode, I display trigger time)

The time of CRNT selection -- VIEW, ARM, and REC mode -- the present time -- table

示

-- the title of

OSD is displayed as Date Time at last time (usually Trigger).

When the image trigger function is being used, I am displayed as Image Trigger.

TRIG

CRNT

Image

trigger

Figure 5-11 Screen display

Figure 5-9 OSD MODE

Figure 5-10 OSD TIME

Содержание MC-529





















































































































































































Результаты поиска

Содержание MC-529

Отзывы:

Похожие инструкции для MC-529

Бренды по названию

Популярные бренды

NAC Image Technology MC-529, Руководство пользователя

Результаты поиска

Содержание MC-529

Отзывы:

Похожие инструкции для MC-529

Бренды по названию

Популярные бренды