NAC Image Technology MC-529, Руководство пользователя

Страница: 76 / 180

(00235) 3-24
3.2.14.5 Burst Recording
With burst recording, the frame for the amount of recording time is controlled with burst trigger signals and
saved in the memory.
Burst trigger signals can save only the desired frames from the period recorded in the memory. As shown
in Figure 3-31, only the frames during the period when the burst trigger signals are input (ON) are saved to
the memory.
Also, the recording memory is segmented into blocks according to the burst trigger signal input time
frame. When the total of the frames saved in each block reaches the number of frames for each recording
time, recording is completed.
Figure 3-31 shows the number of frames for each recording time saved with three burst trigger signal
inputs.
ON OFF OFF ON OFF ON OFF
Block
①
Block
②
Block
③
Recoding time = Burst trigger signal input time(
①+②+③
)
Burst trigger signal
input time
①
Burst trigger signal
input time
②
Burst trigger signal
input time
③
Memory = Block(
①
+
②
+
③
)
Figure 3-34 Burst Recording
The three modes within burst recording include BURST, BURST (A) and BURST (L). Refer to
【
3.2.14.3
Setting Method
】
for the method of setting burst recording.
Next are the restrictions on burst recording and the recording sequence for each mode.
3.2.14.5.1 Burst Recording Restrictions
The following restrictions apply to burst recording.
●
Burst recording cannot be combined with multi trigger recording and event recording. Recording can be
combined with EST synchronized signal recording.
●
Trigger input does not work with the J-PAD3 during burst recording. Input burst recording signals from
the TRIG1 connector on the rear panel or the J3 cable TRIG2 connector.
●
Burst recording signals can be input 16 times in the appropriate memory segment. If the time stamp is
ON and the frame time standard is set to the exposure time, the restrictions on the number of burst
recording signals is eliminated but during playback, it can jump to the top frame of each block up to 16
times.
Refer to
【
5 System setting
】
for
【
3.2.19 TIMESTAMP Setting
】
, and a setting of flame time about a
setting of a time and date stamp.