NAC Image Technology MC-529, Руководство пользователя

Страница: 129 / 180

(00235)
5-11
5.2.9 Selection of the Frame Time Standard (FRM TIME)
When setting the frame counter display to a relative time or an absolute time, the time standard can be
selected.

Trigger Signal Input Time
Using the trigger signal input time during recording as the standard, the time corresponding to
the recording speed is calculated for the next frame (Figure 5-16). The advantage of this setting
is that it is easy to make the time between each frame uniform.
However, the frame time cannot be displayed with EST synchronized signal recording.

Mid-point of the Exposure Start and End Times
The mid-point of the sensor exposure start and end time becomes the frame time (Figure 5-13).
If using the time stamp function, since the image and the time information is saved in the
memory, the frame time for the EST synchronized signal recording is also displayed.
However, if the automatic exposure function (AE) is set, the time between each frame is not
uniform.
Sensor Exposure
Exposure Start Exposure End
Mid-point of the Exposure Start and End Times
Trigger Signal Input Time
Recording Speed
1
Recording Speed
1
Figure 5-16 Standard Timing for the frame Time
1) While in the STOP mode, press MENU to display the
TOP MENU.
2) Use the arrows to select "SYS MENU" from the TOP
MENU and press SET to display the SYS MENU.
3) Use the arrows to select "FRM TIME" from the SYS
MENU (Figure 5-17).
4) Use the arrows to select the frame time standard.
TRIGGER Use the trigger signal input time as the standard
EXPOSURE Use the mid-point of the exposure start and end time as the standard
Figure 5-17 FRM TIME