42
EN
M1.1.TZHD30S-50S.NLFREN - 15032019
The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation between the
emission and exposure levels, this cannot be used reliably to determine whether or not further precautions are required. Factors
that influence the actual level of exposure of the workforce include the characteristics of the work room, the other sources of
noise, namely the number of machines and other adjacent processes. Also the permissible exposure level can vary from country
to country. This information, however, will enable the user of the machine to make a better evaluation of the hazard and risk.
3 Installation of the machine
3�1 Transportation of machines
Transportation and store
The measures of anti-rust and shockproof should be taken during packing. The machine endures transportation and store in
-25~55°C ambient temperature.
Be care of not making machine exposed to rain or damaging the packing during transportation and store.
WARNING!
While transporting or handling the machine, be careful and let the activity be done by qualified
personnel especially trained for this kind of activity!
While the machine is being loaded or unloaded, make sure that no person or subject gets pressed
by the machine!
Select proper transportation device according to the weight of the machine� Make sure the lifting
capacity of transportation device is competent for the weight of the machine�
5. Installation of the machine
5.1 Transportation of machines
5.1.1 Transportation and store
The measures of anti-rust and shockproof should
be taken during packing. The machine endures
transportation and store in -25~55°C ambient
temperature.
Be care of not making machine exposed to rain or
damaging the packing during transportation and
store.
While transporting or handling the machine, be
careful and let the activity be done by qualified
personnel especially trained for this kind of
activity!
While the machine is being loaded or unloaded,
make sure that no person or subject gets
pressed by the machine!
Select proper transportation device according
to the weight of the machine. Make sure the
lifting capacity of transportation device is
competent for the weight of the machine.
5.1.2 Transportation before unpacking
As standard, the machine is packed in a robust
wooden box.
Fig.4
shows the tool can be used to
transport the packing box.
Fig.4
5.2 Unpacking
your machine was carefully packaged for safe
transportation. remove the packaging materials
from around your machine and inspect it. if you
discover the machine is damaged, please
immediately call Customer Service for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
5.3 Safety measure before installation
It is important to maintain free area of 0.8 m around
the machine, which is required for the working
place. If any long material is machined, it is
necessary to have a sufficient room in front of the
machine as well behind it in the places of material
input and output.
Transportation before unpacking
As standard, the machine is packed in a robust wooden box. Figure 4 shows the tool can
be used to transport the packing box.
3�2 Unpacking
Your machine was carefully packaged for safe transportation. Remove the packaging
materials from around your machine and inspect it. If you discover the machine is
damaged, please immediately call customer service for advice.
Figure 4
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim
can be difficult.
3�3 Safety measure before installation
It is important to maintain free area of 0.8 m around the machine, which is required for the working place. If any long material
is machined, it is necessary to have a sufficient room in front of the machine as well behind it in the places of material input
and output.
3�4 Installation
Before beginning assembly, take note of the following precautions and suggestions.
The machine is bolted to the pallet, before attempting any of the assembly procedures remove all of the loose parts and
hardware from the inside of the machine and unbolt the machine from the pallet.
Floor:
This tool distributes a large amount of weight over a small area. Make certain that the floor is capable of supporting
both the weight of the machine and the operator. The floor should also be a level surface. If the unit wobbles or rocks once in
place, be sure to eliminate by using shims.
Working clearance:
Take into consideration the size of the material to be processed. Make sure that you allow enough
space for you to operate the machine freely.
Outlet placement:
Outlets should be located close enough to the machine so that the power cord or extension cord is not in
an area where it would cause a tripping hazard. Be sure to observe all electrical codes if installing new circuits and/or outlets.
copyrighted
document
- all
rights
reserved
by
FBC
