MR ETOS TD, Руководство по эксплуатации

Страница: 338 / 356

15 Technical data
Maschinenfabrik Reinhausen GmbH 2020 338 4453918/14 EN ETOS
®
TD
15.3.3 Digital inputs and outputs
DIO 28-15 DIO 42-20 DIO 42-20 HL
Inputs (plug-based
electrical isolation) Quantity 28 42
Logical 0 0...10 V AC (RMS)
0 to 10 V DC
0...40 V AC (RMS)
0 to 40 V DC
Logical 1 18...260 V AC (RMS)
18 to 260 V DC
170...260 V AC (RMS)
170 to 260 V DC
Input current Typ. 1.3 mA (regardless of U )
Simultaneity factor At 70°C and U ≥ 230 V: max. 50%
Outputs (floating re-
lay outputs) Number (number of
change-over contacts in
parentheses) 15 (9) 20 (12)
Contact load capacity Min.: 5 V, 10 mA
Max. AC: 230 VAC; 5 A
Max. DC: See diagram
Simultaneity factor Up to 60°C: 100%, > 60°C: -5%/K
Table 133: Technical data for the DIO 28-15 and DIO 42-20 assemblies
10
20
30
40
50
100
V
300
0.1 0.2 0.5 1 2 5 10 20 A
U
I
Figure 233: Contact load capacity of digital outputs with resistive load
CAUTION Electric shock!
The inputs of the DIO assembly have plug-based electrical isolation. A mix-
ture of voltage ranges (e.g. extra low voltage and low voltage) or various
phases within a plug can lower the protection against electric shock.
► Use the same voltage ranges within a plug.
► Use the same phase within a plug.