MR ETOS TD, Руководство по эксплуатации

Страница: 297 / 356

9 Visualization
Maschinenfabrik Reinhausen GmbH 2020 297 4453918/14 EN ETOS
®
TD
Function If Input becomes TRUE, Output also instantly becomes
TRUE, this condition takes priority.
If Input has a falling input, the internal timer is set to
zero and starts to run.
When the internal timer has reached or exceeded the
parameter value, Output becomes FALSE and the
counter stops running.
If Input is FALSE and the Reset input becomes TRUE,
Output instantly and forcibly becomes FALSE and the
internal timer is set to the configured desired value.
If the value of Time_ms is less than the cycle time, the
cycle time applies instead.
Initial state All inputs and outputs are FALSE.
Table 104: Switch-off delay function module
9.38.1.3.10 Pulse
Description PLSE, pulse
Inputs Trigger (BOOL)
Outputs Output (BOOL)
Parameter Time ms (UINT32), 1...1,000,000, default = 1,000
Function If there is a rising edge at the Trigger input at any time,
the internal timer is set to zero and starts to run, the
output becomes TRUE.
If the Trigger input becomes FALSE again during the
pulse time, this has no impact on the expiration of the
pulse time.
Once the internal timer has expired, the output be-
comes FALSE.
If the value of Time_ms is less than the cycle time, the
cycle time applies instead.
Initial state All inputs and outputs are FALSE.
Table 105: Pulse function module
9.38.1.3.11 Symmetrical pulse generator
Description CLCK, symmetrical pulse generator
Inputs Enable (BOOL)
Outputs Output (BOOL)
Parameter Time ms (UINT32), 1...1,000,000, default = 1,000