MKS MKSINST IE1000A, Инструкция по эксплуатации

Страница: 64 / 75

Setup Mode Chapter Five: Diagnostic Interface Setup, Configuration, and
Operation
56
Caution If you are unfamiliar with setting TCP/IP settings for the MFC, please contact your
company’s IT personnel or local MKS representative for help. If settings are done
incorrectly, you may no longer be able to connect to the MFC over Ethernet.
To set a new IP Address, enter in the IP address and press the “Submit” button. Pressing the “Reset” button
will reset the entry fields to what was in them prior to you making any changes. For the new IP address to
take effect the power to the MFC must be cycled. To use the Embedded GUI, you must now change the URL
to reflect the new IP address, e.g. http://xx.xx.xx.xx, where xx.xx.xx.xx is the new IP address for the MFC.
Setup Mode / Configuraton Page / Updating Firmware
Updating firmware is the responsibility of your local MKS representative. If any updates are “necessary”,
then your local representative will be in contact to set up a time to complete the upgrade. Please note that a
“necessary” update is one that is deemed “Critical” by the factory.