TLB 55
DIGITAL ELECTRONIC
REFRIGERATION UNITS
CONTROLLER
OPERATING INSTRUCTIONS
Vr. 04 (ENG) - 02/12- cod.: ISTR-MTLB55ENG04
ASCON TECNOLOGIC S.r.l.
VIA INDIPENDENZA 56
27029 VIGEVANO (PV) ITALY
TEL.: +39 0381 69871
FAX: +39 0381 698730
http:\\www.ascontecnologic.com
e-mail: [email protected]
FOREWORD
This manual contains the information
necessary for the product to be installed
correctly and also instructions for its
maintenance and use; we therefore recommend
that the utmost attention is paid to the following
instructions and to save it.
This document is the exclusive property of ASCON
TECNOLOGIC which forbids any reproduction and divulgation
, even in part, of the document, unless expressly authorized.
ASCONT ECNOLOGIC reserves the right to make any formal or
functional changes at any moment and without any notice.
Whenever a failure or a malfunction of the device may cause
dangerous situations for persons, thing or animals, please
remember that the plant has to be equipped with additional
devices which will guarantee safety.
ASCON TECNOLOGIC and its legal representatives do not
assume any responsibility for any damage to people, things or
animals deriving from violation, wrong or improper use or in
any case not in compliance with the instrument’s features.
INDEX
INSTRUMENT ORDERING CODE
7.5
FUNCTIONAL DATA
7.4
MECHANICAL DIMENSIONS
7.3
MECHANICAL DATA
7.2
ELECTRICAL DATA
7.1
TECHNICAL DATA
7
GUARANTEE AND REPAIRS
6.3
CLEANING
6.2
SIGNALLING
6.1
PROBLEMS , MAINTENANCE AND GUARANTEE
6
PROGRAMMABLE PARAMETERS TABLE
5
PARAMETERS CONFIGURATION BY “A01”
4.13
FUNCTION OF KEYS “U” AND “DOWN/AUX”
4.12
AUXILIARY OUTPUT
4.11
DIGITAL INPUTS
4.10
ALARM MEMORY
4.9.5
MAIN VOLTAGE ALARMS
4.9.4
OPEN DOOR ALARM
4.9.3
EXTERNAL ALARM
4.9.2
TEMPERATURE ALARMS
4.9.1
ALARM FUNCTIONS
4.9
EVAPORATOR FANS CONTROL
4.8
MANUAL DEFROST
4.7
DEFROST CONTROL
4.6
COMPRESSOR PROTECTION FUNCTION AND DELAY
AT POWER-ON
4.5
CONTINUOUS CYCLE FUNCTION
4.4
TEMPERATURE CONTROL
4.3
OUTPUTS CONFIGURATION
4.2
MEASURING AND VISUALIZATION
4.1
FUNCTIONS
4
ELECTRICAL WIRING DIAGRAM
3.4
ELECTRICAL CONNECTIONS
3.3
MECHANICAL MOUNTING
3.2
PERMITTED USE
3.1
INFORMATION ON INSTALLATION AND USE
3
KEYBOARD LOCK FUNCTION
2.7
ON / STAND-BY FUNCTION
2.6
ACTIVE SET POINT SELECTION
2.5
PARAMETERS PROGRAMMING LEVEL
2.4
PARAMETER PROTECTION USING THE PASSWORD
2.3
PARAMETERS PROGRAMMING
2.2
PROGRAMMING OF SET POINT
2.1
PROGRAMMING
2
FRONT PANEL DESCRIPTION
1.2
GENERAL DESCRIPTION
1.1
INSTRUMENT DESCRIPTION
1
1 - INSTRUMENT DESCRIPTION
1
.1 - GENERAL DESCRIPTION
The models
TLB 55
(Display and control unit) and
BSLB4
(Supply
and outputs unit) are a digital controller system with
microprocessor that is typically used in cooling applications that
have temperature control with ON/OFF regulation and defrosting
control with set time by means of electrical heating or hot
gas/reverse cycle.
The system has up to 4 relay outputs, 2 inputs for PTC or NTC
temperature probes and 2 digital inputs, that can all be configured.
The 4 outputs at main voltage (in BSL unit) can be used for
controlling the compressor or the temperature control device, the
defrosting device, the evaporation fan and an alarm or an auxiliary
device (light, second compressor etc.) .
The two inputs for the PTC and NTC temperature probes (which
can be selected by parameter) connected to TLB55 unit can be
used to measure the cell temperature (Pr1) and the evaporator
temperature (Pr2) while the digital inputs (DIG1,2) can be
programmed to carry out various functions such as defrosting
commands, selecting 2 or 4 different set of temperature
regulations, external alarm signals, activating a continuous cycle,
and activating an auxiliary output etc.
ASCON TECNOLOGIC - TLB55
- OPERATING INSTRUCTIONS - Vr. 04 - 02/12 - ISTR-MTLB55ENG04 - PAG. 1
