MKS MKSINST IE1000A, Инструкция по эксплуатации

Страница: 50 / 75

Step 2: Configure TCP/IP Settings for Communication to
IE1000A Chapter Five: Diagnostic Interface Setup, Configuration, and
Operation
42
Figure 10: Java Download Window
2. Follow the onscreen prompts to install the Java application.
Step 2: Configure TCP/IP Settings for Communication to IE1000A
In order to communicate to an MFC through the Ethernet interface, the host computer must have a unique,
static IP address which is in the same general format as the MFC. The following steps describe how to set up
the host computer through its local area network connection:
1. Connect a standard CAT-5 Ethernet network cable between the host computer and the MFC.
Note
Older computer systems may require the use of a crossover network cable when the host
computer is directly connected to the MFC. If the connection between the MFC and the
host computer is via an Ethernet hub or Ethernet switch, then standard cables can be
used with all host computer connections.
2. For Windows 7, open the <Control Panel> on the Start menu. Select <Network and Internet> and <View
network status and tasks> to view the active networks on the host computer.