Mitsubishi QCPU (Q Mode), Руководство пользователя

Страница: 189 / 456

7 - 53 7 - 53
MELSEC-Q
7 FUNCTION
2) Trace Point Setup
This sets the timing to collect trace data. Select one from the
following:
a) Each Scan
Collects trace data for every scan (END processing).
b) Interval
Collects trace data at specified times.
c) Detailed
Sets the device and step no. The setting method and trace data
sampling timing is the same as mentioned in section 7.9.1., (when
setting the monitor condition.)
The devices that can be set in the detailed condition are as
follows:
• Bit Device : X, Y, M, L, F, SM, V, B, SB, T(contact),
ST(contact), C(contact), J \X, J \Y, J \B, J
\SB, BL \S
• Word Device : T(current value), ST(current value),C(current
value), D, SD, W, SW, R, Z, ZR, U \G, J \W, J
\SW
The following attributes can be set for the above devices:
• Bit device number of digits specification
• Word device bit number specification
3) Trigger Point setup
This sets the point to execute the trigger. Select one from the
following:
a) At the time of TRACE order:
The time of execution of TRACE instruction is set as the trigger.
b) At the time of trigger operation:
The trigger operation from GX Developer device is set as the
trigger.
c) Detailed setting
The device and step number is set. The setting method and
trigger execution timing is the same as mentioned in Section
7.9.1., (the monitor condition setting.)
4) Additional trace information
The information to be added for every trace is set. Multiple items can
be selected from the following (of none of the items have to be
selected):
a) Time
Stores the time when the trace was executed.
b) Step No.
Stores the step number when the trace was executed.
c) Program Name
Stores the program name that executed the trace.