Mitsubishi A1SD51S, Руководство по программированию

Страница: 433 / 688

11 - 263 11 - 263
MELSEC-Q
11 INSTRUCTIONS AND FUNCTIONS
Format 2 control table
%(0) • • • • • • Format 2 control table
• Specify 256.
%(1) • • • • • • Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
%(2) • • • • • • Specify the station number of the PLC CPU from which
data is read.
See Section 4.2.2 for the allowable specification range.
%(3) • • • • • • Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
%(4) • • • • • • Processing code
• Specify 2.
%(5) • • • • • • Specify whether the monitoring of the device is to be
performed in word or bit units.
• When reading in bit units • • • • • 1
• When reading in word units • • • 2
%(6) • • • • • • Specify the number of device points to be monitored. The
allowable specification ranges for the number of points are
as follows:
• When bit units are specified
• Bit devices 1 to 40 points
• When word units are specified
• Bit devices
• Word devices
1 to 20 words
(16 to 320 points, in units of
16 points)
1 to 20 words
In case of PLC CPUs other than A3HCPU, AnACPU, AnUCPU, and AnSUCPU, one point of
device X (input) is processed as 2 points.
When X is included among the specified devices, specify the number of points as follows:
Specified number of
points for X
2 +
specified number of points
for other devices
40 points
If only X is specified, the number of processing points that can be communicated at one time is
half of the values given above.